There are two separate and distinct parts to the answer to this question. The first part is the wood preservation, and the second part is the visual aesthetic you want to create and maintain.

C2 Guard for Wood is designed first and foremost as a wood stabilizer and preservative. It accomplishes this through its combination of nanoparticle polymers that penetrate deeply into the surface and provide a remarkably long-lasting, water-shedding barrier, eliminating the single biggest enemy of all exterior woods - water. Therefore, from the standpoint of preserving your investment in properly prepared and applied wood, you will not have to re-coat for up to six years on horizontal surfaces and ten years on vertical surfaces.

Regarding aesthetic issues, such as fading, rub-off, or other disfiguration due to use or exposure, the solution is often to touch up or blend a small amount of additional material onto the affected areas only. Resist reapplying to the entire substrate until the level of deterioration is widespread and an entire refresher coat is needed.

The fact that you will eventually have to re-coat your stained area is inevitable. The significant benefit of the C2 Guard program is that C2 Guard will never peel, and you will not have to scrape and sand the worn surface; merely clean and re-coat.

C2 Paint - 2019 Palette Preview

Subscribe to our Newsletter